Відео

Where did you get your 3d model to print from? Thanks!

The lack of initial instructions was a nightmare when I received mine today. i am still trying to find out what the USB data stick is for. I assume I put the memory card in it and then plug it into the USB port to save 3D images, but no instructions found so far

Would that be possible to use in the cr10-s pro ? It has a 24 pin ribbon connector but wondering if there's a way to adapt it.. thx !

Did you ever printed with ABS? I've been printing with CR-10 Smart with Micro Swiss hotend with amazing results. Recently I bought a CR-10 Smart PRO thinking that it will bring even better results but I got disappointed. The printings look like it was melting, I've made loads of tests with no improvements. Maybe it can be due to bad quality of brazilian filaments.

Selling mine

Hi, what slicer do you use for the CR6 max? And did you have to find or modify the profile or did it work off the shelf?

You sell it?

you sell it?

Do you sell it?

Hello, I'm a novice and trying to bring some new life to my CR10s i'm trying to trackdown a silent mainboard for it but coming up with results all over the place. Is there a web page i can look at or something that lists compatible mainboards etc? or are you aware of anything upto date i could procure? Thankyou

17:20 It does save the mesh bed settings, but it does so on the eeprom file located at the sd card. If you instead download InsanityAutomation firmware 7.4.7, it will save the settings internally.

I could use your help. I installed a new v2.2 silent motherboard for my cr 10 s5 and tried the same instructions with the newest version of cura. But when the pc is connected to the printer; the program acts like there is no connection with the printer.

Is the bed level issue an effect of thermal expansion on a large bed in an open environment? Or is it electronic issue?

Hola 👋 buenas buen video ,nueva seguidora.Me podrias ayudar porfavor mi portatil NO detecta la impresora 3d como tal podrias ayudarme necesito ayuda saludos y gracias

Hello, although this video is a while ago, I would like to ask about the stepper motor part. The gear of CR2020 seems to use special specifications? I have had a CR2020 for about 5 years and recently had to replace the gears and found out that it is 8.8 mm in diameter and has 24 teeth. This is different from the gear used by the major 3D printers currently on the market. I would like to ask if you have also encountered this problem.

JUST FYI EMF is a type of radiation so, you could use a smartphone's sensor for that.

Price?

Have you had issues with stringing? I love this printer but I get horrible stringing and I have no clue how to solve it. I can't tell if I should be changing my travel settings or if it's a physical issue. I've been mainly printing temp towers and no matter what I do I have terrible stringing.

would u think this be good for making rc parts as first printer

hallo ich brauche hilfe ich brauche dringend die Firmware on diesen Drucker da bei nix mehr stimmt ich die achsen sind verstellt und er rattert wollte marlin installieren brauche aber sie Stock firmware bitte helfen sie mir

What a heap of junk all you pay for is the fridge with a cr5 inside. I have turned away from creality because of cheap quality. Nothing but problems.

I'm a little bummed that the headlights and taillights don't work. They already have a glow coming from the reactor/engine and a light in the cab.

What else do you use that knife for? Cutting down trees.

This is an absolutely stunning vehicle. Coming to the party late, I’ve picked one up recently but on places like eBay it’s quite telling that despite a 3000 production run, there’s only two available for sale globally right now there, versus so many fleas and statues. I get the feeling this is one of the last things anybody wants to sell from their Fallout collectibles. Fantastic review video, The Wand Company really do an amazing job with these vehicles.

Super Awesome

I’m glad I came across this video as I am having trouble with a UP300 that has horrible, set up instructions and having to do a manual level since they’re automatic leveling is equally as horrible, but did not take into account preheating nozzle and bed for warp factor

Does the Bl touch install on to the sermoon V1

how do we home it after a print iv had issue after issue

a versão da firmware no site, está invertido a polaridade dos eixos, precisa inverter os cabos para funcionar, e não causar problemas. após inverter o lado dos fios, foi resolvido o problema the firmware version on the website, the polarity of the axes is reversed, you need to reverse the cables to work, and not cause problems. after reversing the side of the wires, the problem was solved

Do you need to perform calibration before every printing start? Or is there a way to save settings for future use?

Tanks for show me the machine and not your face, realy tanks.

what is better bambu P1P or this?

Pls I need help with my D1, When I adjust the bed on the corners, the center of the bed still high, what can I do?

That's. . . a helluva lot more skill with a paintbrush than I have.

who are you? and are still working on 3d models?

hey; that''s takes guts painting by hand! first time here, but not last time.fantastic work!!!!

This is pretty cool. Would love one for my games room.

Unarguably the top priority on everybody's list: needs to look cool! Glad that you got that covered right away. No need to finish watching the video.

Does it worth buying this printer

In browsing Amazon, I see they are listed there.

Looks like I'm late to the game. The posted links no longer lead to the new motherboard. Hopefully they are still available.

Hi, just get new one, but have trobles with sliser, the parts have shifts and hotent stops for 1-3 sec at eacth leyer. If anyone had the same problem, please tell me what you do. Ty so much

thank you very much for the Step by Step. I finally got around to doing it, this made it easy!!

Great !! can you share the 3D files? thanks !!

A few days ago (March 2023) I bought a new Ender-6 and also the BL Touch. I had asked Creality sales if they work together as the info isn't on their web site. Layla responded to say yes. When it arrived, I found that the printer end of the cable has a plug that is too big. I emailed Creality support and Layla replied (after a couple of days) saying if the product doesn't fit my printer I should return it to them. It seems that Creality is operated by a cheap AI bot. This is a couple of years after your video! I've not been able to find a JST SH 1mm 5 pin cable that is long enough. I also had no idea that the wire configuration needs to change. Thank you.

i need download

Had mine a few days and absolutely love it! Perfect first layer every time and my PETG prints come out perfectly.

Hi, which retraction are you using? I’m trying with 0,8/45. It seems to be fine. But I’m still getting some line issue even when I did the adjustments on x,y and z 😢 any advice?

Great thank you